HP 5900 series Command Reference

Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal numbers from 0 to F. If you do not specify an IPv6 multicast group, the
command displays dynamic MLD snooping forwarding entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify an IPv6
multicast source, the command displays dynamic MLD snooping forwarding entries for all IPv6 multicast
sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
the command displays dynamic MLD snooping forwarding entries for all VLANs.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays dynamic MLD snooping forwarding entries on the
master device.
Examples
# Display detailed information about the dynamic MLD snooping forwarding entries for VLAN 2.
<Sysname> display mld-snooping group vlan 2 verbose
Total 1 entries.
VLAN 2: Total 1 entries.
(::,FF1E::101)
Attribute: local port
FSM information: normal
Host slots (0 in total):
Host ports (1 in total):
XGE1/0/2 (00:03:23)
Table 60 Command output
Field Descri
p
tion
Total 1 entries Total number of dynamic MLD snooping forwarding entries.
VLAN 2: Total 1 entries Total number of dynamic MLD snooping forwarding entries in VLAN.
(::, FF1E::101)
(S, G) entry, where a double colon (::) in the S position means any IPv6 multicast
sources.
Attribute
Entry attribute:
• global port—The entry has a global port.
• local port—The entry has a port that resides on the specified device.
• slot—The entry has a port that resides on a device other than the specified
device.
FSM information
Finite state machine information of the entry:
• delete—The entry attributes have been deleted.
• dummy—The entry is a new temporary entry.
• no info—No entry exists.
• normal—The entry is a correct entry.
200

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)