Downstream Neighbors (2 in total):
00:59:19, FSM: J
res: 00:59:20, FSM: J
:21, FSM: PP
Table 13 Command output
7.1.1.1
Expires:
7.1.1.11
Expi
XGE1/0/3
Expires: 00:02
Field Descri
tion
Total 1 entries ries. Total number of (S, G) entries and (*, G) ent
FSM Flag: NI-no info, J-join, PP-pr
pending
the downstream port:
tate.
pending.
une
• NI—Initial s
State machine flag of
• J—Join.
• PP—Prune
(172.10.10.1, 225.1.1.1) (S, G) entry.
FSM information
.
w temporary entry.
Finite state machine information of the entry:
• delete—The entry attributes have been deleted
• dummy—The entry is a ne
• no info—No entry exists.
• normal—The entry is a correct entry.
Upstream neighbor Upstream neighbor of the (S, G) or (*, G) entry.
Upstream Ports (1 in total)
, you must specify the slot slot-number option to
Upstream ports, and the total number of the upstream ports.
This field is displayed if the upstream neighbor is on the master
device. Otherwise
display this field.
Downstream Ports (2 in total)
m neighbor, and the total number Downstream port of the upstrea
of the downstream ports.
Downstream neighbors of the downstream port, and the total
number of the downstream neighbors.
Downstream Neighbors (2 in total)
Expires: 00:03:01, FSM: J
wnstream
t is on the
ify the slot
slot-number option to display this field.
Re aining aging time for the downstream port or do
neighbor, and the finite state machine information.
m
• For a global port, this field is always displayed.
• For a non-global port, this field is displayed if the por
master device. Otherwise, you must spec
display pim-snooping statistics
statistics to display statistics for the PIM messages learned through PIM
snooping.
Syntax
display pim-snooping statistics
Use display pim-snooping
49