144
pim hello-option holdtime
Use pim hello-option holdtime to set the PIM neighbor lifetime on an interface.
Use undo pim hello-option holdtime to restore the default.
Syntax
pim hello-option holdtime time
undo pim hello-option holdtime
Default
The PIM neighbor lifetime is 105 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets a PIM neighbor lifetime in the range of 1 to 65535 seconds. If you set the value to 65535
seconds, the PIM neighbor is always reachable.
Usage guidelines
You can set the PIM neighbor lifetime for all interfaces in PIM view or for the current interface in interface
view. The configuration made in interface view takes priority over the configuration made in PIM view.
Examples
# Sets the PIM neighbor lifetime to 120 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option holdtime 120
Related commands
hello-option holdtime (PIM view)
pim hello-option lan-delay
Use pim hello-option lan-delay to set the PIM message propagation delay on a shared-media LAN for
an interface.
Use undo pim hello-option lan-delay to restore the default.
Syntax
pim hello-option lan-delay delay
undo pim hello-option lan-delay
Default
The PIM message propagation delay is 500 milliseconds.
Views
Interface view
To Next Page
Loading...
Need help?
General
