Examples
# Display the multicast boundary information of all multicast groups on all interfaces on the public
network.
<Sysname> display multicast boundary
Boundary Interface
224.1.1.0/24 Vlan1
239.2.2.0/24 Vlan2
Table 22 Command output
Field Descri
tion
Boundary Multicast group that corresponds to the multicast boundary.
Interface Boundary interface that corresponds to the multicast boundary.
Related commands
multicast boundary
display multicast forwarding df-info
Use display multicast forwarding df-info to display information about the DF for multicast forwarding.
Syntax
display multicast [ vpn-instance vpn-instance-name ] forwarding df-info [ rp-address ] [ verbose ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a VPN instance, the command displays information about the DF for
multicast forwarding on the public network.
rp-address: Specifies an RP of BIDIR-PIM by its IP address.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information about the DF.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays information about the DF for multicast forwarding
on the master device.
Usage guidelines
The router that acts as a DF is the only multicast data forwarder to the RP in a BIDIR-PIM domain.
Examples
# Display brief information about the DF for multicast routing on the public network.
<Sysname> display multicast forwarding df-info
67
To Next Page
Loading...
Need help?
General
