136
Default
The global DR priority is 1.
Views
PIM view
Predefined user roles
network-admin
Parameters
priority: Sets a DR priority in the range of 0 to 4294967295. A larger value represents a higher priority.
Usage guidelines
You can set the DR priority for all interfaces in PIM view or for the current interface in interface view. The
configuration made in interface view takes priority over the configuration made in PIM view.
Examples
# Set the global DR priority to 3 on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option dr-priority 3
Related commands
pim hello-option dr-priority
hello-option holdtime (PIM view)
Use hello-option holdtime to set the global PIM neighbor lifetime.
Use undo hello-option holdtime to restore the default.
Syntax
hello-option holdtime time
undo hello-option holdtime
Default
The global PIM neighbor lifetime is 105 seconds.
Views
PIM view
Predefined user roles
network-admin
Parameters
time: Sets a PIM neighbor lifetime in the range of 1 to 65535 seconds. If you set the value to 65535
seconds, PIM neighbors are always reachable.
Usage guidelines
You can set the PIM neighbor lifetime for all interfaces in PIM view or for the current interface in interface
view. The configuration made in interface view takes priority over the configuration made in PIM view.
To Next Page
Loading...
Need help?
General
