HP 5900 series - Multicast VLAN Commands; Display Multicast-Vlan

Multicast VLAN commands
display multicast-vlan
Use display multicast-vlan to display information about multicast VLANs.
Syntax
display multicast-vlan [ vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id: Specifies a VLAN ID in the range of 1 to 4094. If you do not specify a VLAN ID, the command
displays information about all multicast VLANs.
Examples
# Display information about all multicast VLANs.
<Sysname> display multicast-vlan
Total 2 multicast VLANs.
Multicast VLAN 100:
Sub-VLAN list(3 in total):
2-3, 6
Port list(3 in total):
XGE1/0/1
XGE1/0/2
XGE1/0/3
Multicast VLAN 200:
Sub-VLAN list(0 in total):
Port list(0 in total):
Table 15 Command output
Field Descri
p
tion
Total 2 multicast VLANs Total number of multicast VLANs.
Sub-VLAN list(3 in total)
Sub-VLAN list of the multicast VLAN, and the total number of
the sub-VLANs.
Port list(3 in total)
Port list of the multicast VLAN, and the total number of the
ports.
54