Value Meanin
0x200 The entry is in GR state.
display multicast forwarding event
Use display multicast forwarding event to display statistics for multicast forwarding events.
Syntax
display multicast [ vpn-instance vpn-instance-name ] forwarding event [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays statistics for the
multicast forwarding events on the public network.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays statistics for the multicast forwarding events on the
master device.
Examples
# Display statistics for the multicast forwarding events on the public network.
<Sysname> display multicast forwarding event
Total entry active event sent: 0
Total entry inactive event sent: 0
Total NoCache event sent: 2
Total NoCache event dropped: 0
Total WrongIF event sent: 0
Total WrongIF event dropped: 0
Total SPT switch event sent: 0
NoCache rate limit: 1024 packets/s
WrongIF rate limit: 1 packets/10s
Total timer of register suppress timeout: 0
Table 25 Command output
Field Descri
tion
Total entry active event sent Number of times that the entry-active event has been sent.
Total entry inactive event sent Number of times that the entry-inactive event has been sent.
Total NoCache event sent Number of times that the NoCache event has been sent.
Total NoCache event dropped Number of times that the NoCache event has been dropped.
Total WrongIF event sent Number of times that the WrongIF event has been sent.
69
To Next Page
Loading...
Need help?
General
