HP 5900 series Command Reference

display multicast-vlan group
Use display multicast-vlan group to display information about multicast groups in multicast VLANs.
Syntax
display multicast-vlan group [ source-address | group-address | slot slot-number | verbose | vlan
vlan-id ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-address: Specifies a multicast source by its IP address. If you do not specify a multicast source, the
command displays information about multicast groups for all multicast sources in multicast VLANs.
group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to
239.255.255.255. If you do not specify a multicast group, the command displays information about all
multicast groups in multicast VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays information about multicast groups in multicast
VLANs on the master device.
verbose: Displays detailed information.
vlan vlan-id: Specifies a multicast VLAN in the range of 1 to 4094. If you do not specify a VLAN, the
command displays information about multicast groups in all multicast VLANs.
Examples
# Display detailed information about all multicast groups in all multicast VLANs.
<Sysname> display multicast-vlan group verbose
Total 6 entries.
Multicast VLAN 10: Total 3 entries.
(2.2.2.2, 225.1.1.2)
Flags: 0x70000020
Sub-VLANs (1 in total):
VLAN 40
(111.112.113.115, 225.1.1.4)
Flags: 0x70000030
Sub-VLANs (1 in total):
VLAN 40
(0.0.0.0, 226.1.1.6)
Flags: 0x60000020
Sub-VLANs (1 in total):
VLAN 40
Multicast VLAN 20: Total 3 entries.
55

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)