Figure 2 Command output
Field Descri
tion
Entries in total Total number of IPv6 multicast groups.
(*, FF03::101) (*, G) entry.
(2001::101, FF3E::202) (S, G) entry.
Interface Interface name.
Expires
Remaining time for the IPv6 multicast group.
The timer is disabled, and this field displays Never.
Related commands
reset mld group
display mld interface
Use display mld interface to display MLD information for an interface.
Syntax
display mld [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays MLD information for
interfaces on the public network.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, the command displays MLD information for all MLD-enabled interfaces.
verbose: Displays detailed MLD information.
Examples
# Display detailed MLD information for VLAN-interface 1 on the public network.
<Sysname> display mld interface vlan-interface 1 verbose
Vlan-interface1(FE80::200:AFF:FE01:101):
MLD is enabled.
MLD version: 1
Query interval for MLD: 125s
Other querier present time for MLD: 255s
Maximum query response time for MLD: 10s
Last listener query interval: 1s
Last listener query count: 2
Startup query interval: 31s
276