HP 5900 series Command Reference

Field Descri
p
tion
MAC group address Address of the MAC multicast group.
Host slots (0 in total)
number of the member device
Member IDs of the member devices that have member ports and the total
s (excluding the specified member device).
Host ports (3 in total) Member ports, and the total number of the member ports.
dot1p MP-snooping view)
ages globally.
Use undo dot1p-priority to restore the default.
Syntax
priority-number
rity
Views
ping view
Predefine
Parameters
igher value means
Usage guide
his command and the igmp-snooping dot1p-priority command have the same function but different
mmand in IGMP-snooping view takes effect on all VLANs.
es effect on the current VLAN.
, the igmp-snooping dot1p-priority command takes priority over the dot1p-priority
GMP-snooping view.
Examples
ally.
Related c
igmp-snooping dot1p-priority
-priority (IG
Use dot1p-priority to set the 802.1p priority for IGMP mess
dot1p-priority
undo dot1p-prio
Default
The 802.1p priority for IGMP messages is not configured.
IGMP-snoo
d user roles
network-admin
priority-number: Sets an 802.1p priority for IGMP messages, in the range of 0 to 7. A h
a higher priority.
lines
T
effective ranges:
• The dot1p-priority co
• The igmp-snooping dot1 p-priority command tak
For a VLAN
command in I
# Set the 802.1p priority for IGMP messages to 3 glob
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] dot1p-priority 3
ommands
13

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)