Related commands
display igmp-snooping statistics
router-aging-time (IGMP-snooping view)
Use router-aging-time to set the global aging timer for dynamic router ports.
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The global aging timer for dynamic router ports is 260 seconds.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
interval: Sets an aging timer for dynamic router ports, in the range of 1 to 8097894 seconds.
Usage guidelines
This command and the igmp-snooping router-aging-time command have the same function but different
effective ranges:
• The router-aging-time command in IGMP-snooping view takes effect on all VLANs.
• The igmp-snooping router-aging-time command takes effect on the current VLAN.
For a VLAN, the igmp-snooping router-aging-time command takes priority over the router-aging-time
command in IGMP-snooping view.
Examples
# Set the global aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] router-aging-time 100
Related commands
igmp-snooping router-aging-time
source-deny (IGMP-snooping view)
Use source-deny to enable multicast source port filtering on ports to discard all the received multicast
data packets.
Use undo source-deny to disable multicast source port filtering on ports.
Syntax
source-deny port interface-list
43
To Next Page
Loading...
Need help?
General
