HP 5900 series Command Reference

<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib] quit
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim dm
[Sysname-Vlan-interface100] ipv6 pim passive
hello-option override-interval (IPv6 PIM view)
t the global override interval.
val to restore the default.
undo hello-option override-interval
Default
ride interval is 2500 milliseconds.
Views
PIM view
Predefine
min
Paramete
elines
nt interface in interface
on made in IPv6 PIM
Examples
bal override interval to 2000 milliseconds on the public network.
ride-interval 2000
Related c
holdtime join-prune (IPv6 PIM view)
set the global joined/pruned state holdtime timer.
ne to restore the default.
Use hello-option override-interval to se
Use undo hello-option override-inter
Syntax
hello-option override-interval interval
The global over
IPv6
d user roles
network-ad
rs
interval: Sets an override interval in the range of 1 to 65535 milliseconds.
Usage guid
You can set the override interval for all interfaces in IPv6 PIM view or for the curre
view. The configuration made in interface view takes priority over the configurati
view.
# Set the glo
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option over
ommands
• hello-option lan-delay (IPv6 PIM view)
• ipv6 pim hello-option lan-delay
• ipv6 pim hello-option override-interval
Use holdtime join-prune to
Use undo holdtime join-pru
323

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)