HP 5900 series Command Reference

Predefined user roles
Paramete
lines
nce keyword in an ACL rule, the rule does not take effect. The other optional
ord and the fragment keyword in the ACL rules are ignored.
Examples
n IPv6 PIM register policy to accept the register messages from the
f 3:1::/64 to the groups on the subnet of FF0E:13::/64.
64 destination ff0e:13:: 64
[Sysname-acl6-adv-3000] quit
egister-policy 3000
ter-whole-checksum (IPv6 PIM view)
m to configure the switch to calculate the checksum based on an entire
Use undo register-whole-checksum to restore the default.
Syntax
register-whole-checksum
hole-checksum
lates the checksum based on the register message header.
Predefine es
Examples
to calculate the checksum based on an entire register
<Sysname> system-view
network-admin
rs
acl6-number: Specifies an IPv6 advanced ACL number in the range of 3000 to 3999.
Usage guide
In an IPv6 advanced ACL, the source and destination keywords match the source address and multicast
group address in register messages, respectively.
If you specify the vpn-insta
parameters except the time-range keyw
# On the public network, configure a
sources on the subnet o
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule permit ipv6 source 3:1::
[Sysname] ipv6 pim
[Sysname-pim6] r
regis
Use register-whole-checksu
register message.
undo register-w
Default
The switch calcu
Views
IPv6 PIM view
d user rol
network-admin
# On the public network, configure the switch
message.
[Sysname] ipv6 pim
[Sysname-pim6] register-whole-checksum
338

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)