HP 5900 series - Display Pim Bsr-Info

121
display pim bsr-info
Use display pim bsr-info to display BSR information in the PIM-SM domain.
Syntax
display pim [ vpn-instance vpn-instance-name ] bsr-info
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays BSR information on
the public network.
Examples
# Display BSR information in the PIM-SM domain on the public network.
<Sysname> display pim bsr-info
Scope: non-scoped
State: Accept Preferred
Bootstrap timer: 00:01:44
Elected BSR address: 12.12.12.1
Priority: 64
Hash mask length: 30
Uptime: 00:21:56
Scope: 239.4.0.0/16
State: Accept Any
Scope-zone expiry timer: 00:21:12
Scope: 239.1.0.0/16
State: Elected
Bootstrap timer: 00:00:26
Elected BSR address: 17.1.11.1
Priority: 64
Hash mask length: 30
Uptime: 02:53:37
Candidate BSR address: 17.1.11.1
Priority: 64
Hash mask length: 30
Scope: 239.2.2.0/24
State: Candidate
Bootstrap timer: 00:01:56
Elected BSR address: 61.2.37.1