HP 5900 series Command Reference

134
Static RP information:
RP address ACL Mode Preferred
3.3.3.1 2000 pim-sm No
3.3.3.2 2001 bidir Yes
3.3.3.3 2002 pim-sm No
3.3.3.4 pim-sm No
3.3.3.5 2002 pim-sm Yes
Table 46 Command output
Field Descri
p
tion
Auto RP address is IP address of the Auto-RP.
RP agent address IP address of the Auto-RP agent.
Group/MaskLen Multicast group to which the RP is designated.
[B]
The RP provides services for multicast groups in the BIDIR-PIM domain. If this field
is not displayed, the RP provides services for groups in the PIM-SM domain.
RP address
IP address of the RP. If the RP resides on the device where the command is
executed, this field displays (local) after the address.
Priority Priority of the RP.
HoldTime RP lifetime.
Uptime Length of time the RP has been up.
Expires Remaining lifetime for the RP.
Preferred Whether the static RP is preferred.
Configured ACL/ACL ACL defining the multicast groups to which the static RP is designated.
Mode RP service mode: PIM-SM or BIDIR-PIM.
RP mapping for this group IP address of the RP that provides services for the multicast group.
display pim statistics
Use display pim statistics to display statistics for PIM packets.
Syntax
display pim statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display statistics for PIM packets.
<Sysname> display pim statistics
Received PIM packets: 3295
Sent PIM packets : 5975

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)