HP 5900 series Command Reference

133
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays RP information on the
public network.
group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to
239.255.255.255. If you do not specify a multicast group, the command displays RP information for all
multicast groups.
Examples
# Display RP information for the multicast group 224.0.1.1 on the public network.
<Sysname> display pim rp-info 224.0.1.1
Auto RP address is: 1.1.1.1
HoldTime: 181
Uptime: 00:20:19
Expires: 00:02:42
BSR RP address is: 2.2.2.2
Priority: 192
HoldTime: 150
Uptime: 03:01:10
Expires: 00:02:30
Static RP address is: 3.3.3.5
Preferred: Yes
Configured ACL: 2003
RP mapping for this group is: 3.3.3.5
# Display RP information for all multicast groups on the public network.
<Sysname> display pim rp-info
Auto RP information:
RP agent address: 4.4.4.4
Group/MaskLen: 224.0.0.0/4
RP address HoldTime Uptime Expires
1.1.1.1 181 00:20:19 00:02:42
Group/MaskLen: 225.1.0.0/16 [B]
RP address HoldTime Uptime Expires
1.1.1.2 181 00:20:19 00:02:42
BSR RP information:
Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
RP address Priority HoldTime Uptime Expires
1.1.1.1 (local) 192 150 03:01:36 00:02:29
2.2.2.2 192 150 1d:13h 00:02:02
Group/MaskLen: 225.1.0.0/16 [B]
RP address Priority HoldTime Uptime Expires
3.3.3.3 192 150 12w:5d 00:02:05

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)