HP 5900 series Command Reference

122
Priority: 64
Hash mask length: 30
Uptime: 02:53:32
Candidate BSR address: 17.1.12.1
Priority: 64
Hash mask length: 30
Scope: 239.3.3.0/24
State: Pending
Bootstrap timer: 00:00:07
Candidate BSR address: 17.1.13.1
Priority: 64
Hash mask length: 30
Table 38 Command output
Field Descri
p
tion
Scope-zone expiry timer Scoped zone aging timer.
Elected BSR address Address of the elected BSR.
Candidate BSR address Address of the candidate BSR.
Priority BSR priority.
Uptime Length of time the BSR has been up.
display pim claimed-route
Use display pim claimed-route to display information about all routes that PIM uses.
Syntax
display pim [ vpn-instance vpn-instance-name ] claimed-route [ source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays information about all
routes that PIM uses on the public network.
source-address: Specifies a multicast source by its IP address. If you do not specify a multicast source, the
command displays information about all routes that PIM uses.
Examples
# Display information about all routes that PIM uses on the public network.
<Sysname> display pim claimed-route
RPF-route selecting rule: longest-match

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)