HP 5900 series Command Reference

ipv6 pim hello-option holdtime
set the IPv6 PIM neighbor lifetime on an interface.
Use undo ipv6 pim hello-option holdtime to restore the default.
Syntax
ipv6 pim hello-option holdtime time
hello-option holdtime
ighbor lifetime is 105 seconds.
Predefine
min
Paramete
6 PIM neighbor lifetime in the range of 1 to 65535 seconds. If you set the value to 65535
, the IPv6 PIM neighbor is always reachable.
Usage guide
ighbor lifetime for all interfaces in IPv6 PIM view or for the current interface
rface view takes priority over the configuration made in
120 seconds on VLAN-interface 100.
<Sysname> system-view
o-option holdtime 120
Related c
IPv6 PIM view)
pim hello-option lan-delay
et the IPv6 PIM message propagation delay on a shared-media
Use undo ipv6 pim hello-option lan-delay to restore the default.
Syntax
ipv6 pim hello-option lan-delay delay
hello-option lan-delay
ssage propagation delay on a shared-media LAN is 500 milliseconds.
Use ipv6 pim hello-option holdtime to
undo ipv6 pim
Default
The IPv6 PIM ne
Views
Interface view
d user roles
network-ad
rs
time: Sets an IPv
seconds
lines
You can set the IPv6 PIM ne
in interface view. The configuration made in inte
IPv6 PIM view.
Examples
# Sets the IPv6 PIM neighbor lifetime to
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim hell
ommands
hello-option holdtime (
ipv6
Use ipv6 pim hello-option lan-delay to s
LAN for an interface.
undo ipv6 pim
Default
The IPv6 PIM me
328

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)