HP 5900 series Command Reference

138
hello-option neighbor-tracking (PIM view)
Use hello-option neighbor-tracking to enable neighbor tracking and disable join message suppression
globally.
Use undo hello-option neighbor-tracking to restore the default.
Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
Default
Neighbor tracking is disabled, and join message suppression is enabled.
Views
PIM view
Predefined user roles
network-admin
Usage guidelines
You can enable neighbor tracking for all interfaces in PIM view or for the current interface in interface
view. The configuration made in interface view takes priority over the configuration made in PIM view.
Examples
# Enable neighbor tracking globally on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option neighbor-tracking
Related commands
pim hello-option neighbor-tracking
hello-option override-interval (PIM view)
Use hello-option override-interval to set the global override interval.
Use undo hello-option override-interval to restore the default.
Syntax
hello-option override-interval interval
undo hello-option override-interval
Default
The global override interval is 2500 milliseconds.
Views
PIM view
Predefined user roles
network-admin

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)