HP 5900 series Command Reference

Views
Any view
Predefine
twork-admin
Examples
s learned through PIM snooping.
tatistics
in total: 200
R d PIMv1 messages in total: 0
T tput
d user roles
ne
network-operator
# Display statistics for the PIM message
ping s<Sysname> display pim-snoo
Received PIMv2 hello: 100
Received PIMv2 join/prune: 100
Received PIMv2 error: 0
Received PIMv2 messages
eceive
able 14 Command ou
Field Descri
p
tion
Received PIMv2 hello Number of received PIMv2 hello messages.
Received PIMv2 join/prune Number of received PIMv2 join/prune messages.
Received PIMv2 error Number of received PIMv2 messages with errors.
Received PIMv2 messages in total Total number of received PIMv2 messages.
Received PIMv1 messages in total Total number of received PIMv1 messages.
Related commands
reset pim-snooping statistics
pim-sn
Use pim-snooping enable to enable PIM snooping for a VLAN.
g enable to disable PIM snooping for a VLAN.
Syntax
pim-snooping enable
g is disabled in a VLAN.
les
Usage gu
You must enable IGMP snooping globally and for a VLAN before you execute this command the VLAN.
ooping enable
Use undo pim-snoopin
undo pim-snooping enable
Default
PIM snoopin
Views
VLAN view
Predefined user ro
network-admin
idelines
50

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)