HP 5900 series Command Reference

Received IGMPv2 reports: 19
Received IGMP leaves: 0
Received IGMPv2 specific queries: 0
Sent IGMPv2 specific queries: 0
Received IGMPv3 reports: 1
Received IGMPv3 reports with right and wrong records: 0
Received IGMPv3 specific queries: 0
Received IGMPv3 specific sg queries: 0
Sent IGMPv3 specific queries: 0
Sent IGMPv3 specific sg queries: 0
Received PIMv2 hello: 0
Received error IGMP messages: 19
Table 6 Command output
Field Descri
p
tion
general queries Number of IGMP general queries.
specific queries Number of IGMP group-specific queries.
reports Number of IGMP reports.
leaves Number of IGMP leave messages.
reports with right and wrong records Number of IGMP reports with correct and incorrect records.
specific sg queries Number of IGMP group-and-source-specific queries.
PIMv2 hello Number of PIMv2 hello messages.
error IGMP messages Number of IGMP messages with errors.
Related commands
reset igmp-snooping statistics
display l2-multicast ip
Use display l2-multicast ip to display information about Layer 2 IP multicast groups.
Syntax
display l2-multicast ip [ group group-address | source source-address ] * [ vlan vlan-id ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group group-address: Specifies a multicast group by its IP address. If you do not specify a multicast group,
the command displays information about all Layer 2 IP multicast groups.
8

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)