<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description CustomerA
peer mesh-group
Use peer mesh-group to configure an MSDP peer as a mesh group member.
Use undo peer mesh-group to remove an MSDP peer from the mesh group.
Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group
Default
An MSDP peer does not belong to any mesh group.
Views
MSDP view
Predefined user roles
network-admin
Parameters
peer-address: Specifies an MSDP peer by its IP address.
name: Specifies a mesh group, a case-sensitive string of 1 to 32 characters. A mesh group name must not
contain any spaces.
Examples
# On the public network, configure the MSDP peer 125.10.7.6 as a member of the mesh group Group1.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 mesh-group Group1
peer minimum-ttl
Use peer minimum-ttl to configure the lower TTL threshold for multicast data packets encapsulated in SA
messages.
Use undo peer minimum-ttl to restore the default.
Syntax
peer peer-address minimum-ttl ttl-value
undo peer peer-address minimum-ttl
Default
The lower TTL threshold for a multicast packet to be encapsulated in an SA message is 0.
Views
MSDP view
175
To Next Page
Loading...
Need help?
General
