EasyManuals Logo

HP 5900 series Command Reference

HP 5900 series
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #263 background imageLoading...
Page #263 background image
Predefined user roles
network-admin
Parameters
interface-list: Specifies a port in the form of interface-type interface-number, or a port range in the form
of interface-type interface-number to interface-type interface-number.
all: Specifies all user ports in the current IPv6 multicast VLAN.
Usage guidelines
A port can belong to only one IPv6 multicast VLAN.
You can assign Ethernet interfaces and Layer 2 aggregate interfaces as user ports to an IPv6 multicast
VLAN.
Examples
# Assign Ten-GigabitEthernet 1/0/1 through Ten-GigabitEthernet 1/0/5 to IPv6 multicast VLAN 100.
<Sysname> system-view
[Sysname] ipv6 multicast-vlan 100
[Sysname-ipv6-mvlan-100] port ten-gigabitethernet 1/0/1 to ten-gigabitethernet 1/0/5
reset ipv6 multicast-vlan group
Use reset ipv6 multicast-vlan group to clear IPv6 multicast groups in IPv6 multicast VLANs.
Syntax
reset ipv6 multicast-vlan group [ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | vlan vlan-id ] *
Views
User view
Predefined user roles
network-admin
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal
numbers from 0 to F. If you do not specify an IPv6 multicast group, the command clears all IPv6 multicast
groups in IPv6 multicast VLANs.
prefix-length: Specifies a prefix length of the IPv6 multicast group address. The value range is 8 to 128
and the default value is 128.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify an IPv6
multicast source, the command clears IPv6 multicast groups for all IPv6 multicast sources in IPv6 multicast
VLANs.
prefix-length: Specifies a prefix length of the IPv6 multicast source address. The value range is 0 to 128
and the default value is 128.
vlan vlan-id: Specifies an IPv6 multicast VLAN in the range of 1 to 4094. If you do not specify an IPv6
multicast VLAN, the command clears IPv6 multicast groups in all IPv6 multicast VLANs.
253

Table of Contents

Other manuals for HP 5900 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5900 series and is the answer not in the manual?

HP 5900 series Specifications

General IconGeneral
Ports48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity1.28 Tbps
MAC Address Table Size128K
Routing ProtocolsRIP, OSPF, BGP, IS-IS
VLAN Support4K VLANs
Dimensions440 x 460 x 44 mm
Operating Temperature0°C to 45°C
Operating Humidity10% to 90% (noncondensing)

Related product manuals