HP 5900 series Command Reference

Usage guidelines
ulticast routing is enabled on the VPN instance.
Examples
6 PIM-DM on VLAN-interface 100 on the public network.
rib6] quit
vlan-interface 100
ipv6 multicast routing
ipv6 p
t the DR priority on an interface.
rity to restore the default.
rity
undo ipv6 pim hello-option dr-priority
Default
on an interface is 1.
Views
rface view
Predefine
min
Paramete
elines
IM view or for the current interface in interface view.
interface view takes priority over the configuration made in IPv6 PIM view.
Examples
system-view
100
[Sysname-Vlan-interface100] ipv6 pim hello-option dr-priority 3
hello-option dr-priority (IPv6 PIM view)
This command takes effect only when IPv6 multicast routing is enabled. If the interface belongs to a VPN
instance, make sure IPv6 m
# Enable IPv6 multicast routing, and enable IPv
<Sysname> system-view
ipv6 multicast routing [Sysname]
[Sysname-m
[Sysname] interface
[Sysname-Vlan-interface100] ipv6 pim dm
Related commands
im hello-option dr-priority
Use ipv6 pim hello-option dr-priority to se
Use undo ipv6 pim hello-option dr-prio
Syntax
ipv6 pim hello-option dr-priority prio
The DR priority
Inte
d user roles
network-ad
rs
priority: Sets a DR priority in the range of 0 to 4294967295. A larger value represents a higher priority.
Usage guid
You can set the DR priority for all interfaces in IPv6 P
The configuration made in
# Set the DR priority to 3 on VLAN-interface 100.
<Sysname>
[Sysname] interface vlan-interface
Related commands
327

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)