HP 5900 series Command Reference

Route/mask: 7:11::/64 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8::2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7:11::10, ff1e::1)
(7:11::10, ff1e::2)
(7:11::10, ff1e::3)
(*, ff1e::4)
Route/mask: 7:12::/64 (unicast)
RPF interface: Vlan-interface2, RPF neighbor: 8::3,
Total number of (S,G) or (*,G) dependent on this route entry: 2
(7:12::10, ff1e::1)
(7:12::10, ff1e::2)
Table 88 Command output
Field Descri
p
tion
Route/mask
Route entry. Route types in parentheses include:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Directly connected unicast route.
• unicast—Other unicast route, such as static unicast route.
RPF interface Name of the RPF interface.
RPF neighbor IPv6 address of the RPF neighbor.
Total number of (S,G) or (*,G) dependent on
this route entry
Total number (S, G) or (*, G) entries dependent on the RPF route
and their details.
display ipv6 pim c-rp
Use display ipv6 pim c-rp to display C-RP information in the IPv6 PIM-SM domain.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays information about
learned C-RPs on the public network.
local: Specifies local C-RPs. If you do not specify this keyword, the command displays information about
all C-RPs.
307

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)