HP 5900 series - Display Ipv6 Pim Routing-Table

Bidirectional PIM: Enabled
Secondary address(es):
1::1
Table 93 Command output
Field Descri
p
tion
Neighbor Primary IPv6 address (link-local address) of the IPv6 PIM neighbor.
Interface Interface that connects to the IPv6 PIM neighbor.
Uptime Length of time the IPv6 PIM neighbor has been up.
Expires/Expiry time
Remaining lifetime for the IPv6 PIM neighbor. If the IPv6 PIM neighbor is
always up and reachable, this field displays never.
DR-Priority/DR Priority Priority of the IPv6 PIM neighbor.
Mode
IPv6 PIM mode. If the IPv6 PIM mode is BIDIR-PIM, this field displays B. If
an IPv6 PIM mode other than IPv6 BIDIR-PIM is used, this field is blank.
Generation ID
Generation ID of the IPv6 PIM neighbor. (A random value represents a
status change of the IPv6 PIM neighbor.)
Holdtime
Lifetime of the IPv6 PIM neighbor. If the IPv6 PIM neighbor is always up
and reachable, this field displays forever.
LAN delay IPv6 PIM message propagation delay.
Override interval Interval for overriding prune messages.
State refresh interval
Interval for refreshing state.
This field is displayed only when the IPv6 PIM neighbor is operating in
IPv6 PIM-DM mode and the state refresh feature is enabled.
Neighbor tracking Neighbor tracking status: enabled or disabled.
Bidirectional PIM Whether IPv6 BIDIR-PIM is enabled.
Secondary address(es) Secondary IPv6 address (non-link-local address) of the IPv6 PIM neighbor.
display ipv6 pim routing-table
Use display ipv6 pim routing-table to display IPv6 PIM routing entries.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] routing-table [ ipv6-group-address [ prefix-length ]
| ipv6-source-address [ prefix-length ] | flags flag-value | fsm | incoming-interface interface-type
interface-number | mode mode-type | outgoing-interface { exclude | include | match } interface-type
interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
313