HP 5900 series Command Reference

enable (IGMP-snooping view)
Use enable to enable IGMP snooping for VLANs.
sable IGMP snooping for VLANs.
-list
o enable vlan vlan-list
Default
Predefine
Parameters
specifies a VLAN by its
elines
p-snooping enable command have the same function but different effective
kes effect on the specified VLANs.
p-snooping enable command takes effect on the current VLAN.
le command in IGMP-snooping view and the igmp-snooping enable command
e most recent configuration takes effect.
Examples
MP snooping for VLAN 2 through VLAN 10.
<Sysname> system-view
vlan 2 to 10
Related c
• igmp-snooping
ing enable
limit (IGMP-snooping view)
bal maximum number of IGMP snooping forwarding entries, including
dynamic entries and static entries.
restore the default.
Use undo enable to di
Syntax
enable vlan vlan
und
IGMP snooping is disabled in a VLAN.
Views
IGMP-snooping view
d user roles
network-admin
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1
to 4094.
Usage guid
You must enable IGMP snooping globally before you enable IGMP snooping for VLANs.
This command and the igm
ranges:
• The enable command in IGMP-snooping view ta
• The igm
For a VLAN, the enab
have the same priority, and th
# Enable IGMP snooping globally, and enable IG
[Sysname] igmp-snooping
[Sysname-igmp-snooping] enable
ommands
• igmp-snoop
entry-
Use entry-limit to set the glo
Use undo entry-limit to
14

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)