HP 5900 series Command Reference

ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address in the range of FFxy::/16,
where "x" and "y" represent any hexadecimal numbers from 0 to F. If you do not specify an IPv6
ulticast
8.
entified by the scope
terface interface-type interface-number: Specifies an interface by its type and number. If you do not
ify an interface, the command displays IPv6 multicast boundary information on all interfaces.
Examples
Pv6 multicast groups on all interfaces on the
Vlan1
admin-scope zones on all interfaces on the
ary scope
erface
Table 75 Command
multicast group, the command displays the IPv6 multicast boundary information of all IPv6 m
groups.
prefix-length: Specifies an address prefix length in the range of 8 to 128. The default is 12
scope: Displays the IPv6 multicast group boundary information in the admin-scope zone.
scope-id: Specifies an admin-scope zone by its ID in the range of 3 to 15, which is id
field in the IPv6 multicast group address. If you do not specify an admin-scoped zone, the command
displays the IPv6 multicast boundary information of all IPv6 admin-scope zones.
in
spec
# Display the IPv6 multicast boundary information of all I
public network.
<Sysname> display ipv6 multicast boundary group
Boundary Interface
FF1E::/64
# Display IPv6 multicast boundary information in all IPv6
public network.
<Sysname> display ipv6 multicast bound
Boundary Int
3 Vlan-interface1
output
Field Descri
p
tion
Boundary
IPv6 multicast group or IPv6 admin-scope zone that corresponds to th
boundary.
e IPv6 multicast
Interface Boundary interface that corresponds to the IPv6 multicast boundary.
ommands Related c
displa
Use display ipv6 multicast forwarding df-info to display information about the DF for IPv6 multicast
forwarding.
Syntax
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding df-info [ ipv6-rp-address ]
[ verbose ] [ slot slot-number ]
Views
Predefine
ipv6 multicast boundary
y ipv6 multicast forwarding df-info
Any view
d user roles
network-admin
257

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)