HP 5900 series - Last-Member-Query-Interval (IGMP-Snooping View)

Views
VLAN view
Predefined user roles
Paramete
pecifies an IGMP snooping version, 2 or 3.
Usage guide
or the VLAN.
The version command in IGMP-snooping view takes effect on the specified VLANs.
ing version command and the version command in IGMP-snooping view
st recent configuration takes effect.
Examples
ecify IGMP snooping version 3.
igmp-snooping
sname] vlan
ping enable
ersion 3
Related commands
• igmp-snooping enable
ember-query-interval (IGMP-snooping view)
Use last-member-query-interval to set the global IGMP last member query interval.
Use undo last-member-query-interval to restore the default.
Syntax
last-member-query-interval interval
y-interval
st member query is 1 second.
Predefined user roles
network-admin
network-admin
rs
version-number: S
lines
You must enable IGMP snooping for a VLAN before you execute this command f
This command and the version command in IGMP-snooping view have the same function but different
effective ranges:
•
• The igmp-snooping version command takes effect on the current VLAN.
For a VLAN, the igmp-snoop
have the same priority, and the mo
# In VLAN 2, enable IGMP snooping, and sp
<Sysname> system-view
[Sysname]
[Sysname-igmp-snooping] quit
[Sy 2
[Sysname-vlan2] igmp-snoo
[Sysname-vlan2] igmp-snooping v
• enable (IGMP-snooping view)
• version (IGMP-snooping view)
last-m
undo last-member-quer
Default
The global IGMP la
Views
IGMP-snooping view
38