HP 5900 series Command Reference

Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
Default
king is disabled, and join message suppression is enabled.
Views
iew
Predefine
elines
PIM view or for the current interface in
es priority over the configuration made in
Examples
ighbor tracking globally on the public network.
o-option neighbor-tracking
ipv6 p
ve to enable IPv6 PIM passive mode on an interface.
ve to restore the default.
undo ipv6 pim passive
Default
assive mode is disabled for an interface.
Views
iew
Predefine
twork-admin
Usage gu
hen IPv6 PIM-DM or IPv6 PIM-SM is enabled on the interface.
Examples
enable IPv6 multicast routing. Then, enable IPv6 PIM-DM and IPv6 PIM passive
Neighbor trac
IPv6 PIM v
d user roles
network-admin
Usage guid
You can enable neighbor tracking for all interfaces in IPv6
interface view. The configuration made in interface view tak
IPv6 PIM view.
# Enable ne
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hell
Related commands
ipv6 pim hello-option neighbor-tracking
im passive
Use ipv6 pim passi
Use undo ipv6 pim passi
Syntax
ipv6 pim passive
The IPv6 PIM p
Interface v
d user roles
ne
idelines
This command takes effect only w
# On the public network,
mode on VLAN-interface 100.
322

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)