Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] rp-info [ ipv6-group-address ]
Predefine
ork-admin
Paramete
ecifies an IPv6 multicast group by its address in the range of FFxy::/16 (excluding
x0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal numbers
. If you do not specify an IPv6 multicast group, the command displays RP information for all
Examples
P for the IPv6 multicast group FF0E::101 on the public network.
v6 pim rp-info ff0e::101
2::1
2::1
:1 (local host)
ut all RPs for all IPv6 multicast groups.
info
Priority HoldTime Uptime Expires
:39 00:02:57
erred
Views
Any view
d user roles
netw
network-operator
rs
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays RP information on the
public network.
ipv6-group-address: Sp
FF
from 0 to F
IPv6 multicast groups.
# Display information about the R
<Sysname> display ip
BSR RP address is: 7:1
Priority: 192
HoldTime: 180
Uptime: 03:01:10
30 Expires: 00:02:
tatic RP address is: 7:1 S
Preferred: No
Configured ACL: 2003
RP mapping for this group is: 7:12:
# Display information abo
<Sysname> display ipv6 pim rp-
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF00::/8
RP address Priority HoldTime Uptime Expires
8:12::2 (local) 192 180 03:01:36 00:02:29
Group/MaskLen: FF23::/92 [B]
RP address
7:12::1 (local) 192 180 00:00
Static RP information:
RP address ACL Mode Pref
3:3::1 2000 pim-sm No
3:3::2 2001 bidir Yes
3:3::3 2002 pim-sm No
317