EasyManuals Logo

HP 5900 series Command Reference

HP 5900 series
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
Syntax
display multicast [ vpn-instance vpn-instance-name ] routing-table [ source-address [ mask { mask-length
| mask } ] | group-address [ mask { mask-length | mask } ] | incoming-interface interface-type
interface-number | outgoing-interface { exclude | include | match } interface-type interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays multicast routing
entries on the public network.
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.
mask-length: Specifies an address mask length. The default value is 32. For a multicast group address,
the value range for this argument is 4 to 32. For a multicast source address, the value range for this
argument is 0 to 32.
mask: Specifies an address mask. The default is 255.255.255.255.
incoming-interface: Specifies the multicast routing entries that contain the specified incoming interface.
interface-type interface-number: Specifies an incoming interface by its type and number.
outgoing-interface: Specifies the multicast routing entries that contain the specified outgoing interface.
exclude: Specifies the multicast routing entries that do not contain the specified interface in the outgoing
interface list.
include: Specifies the multicast routing entries that contain the specified interface in the outgoing
interface list.
match: Specifies the multicast routing entries that contain only the specified interface in the outgoing
interface list.
Usage guidelines
Multicast routing tables are the basis of multicast forwarding. You can display the establishment state of
an (S, G) entry by examining the multicast routing table.
Examples
# Display multicast routing entries on the public network.
<Sysname> display multicast routing-table
Total 1 entry
00001. (172.168.0.2, 227.0.0.1)
Uptime: 00:00:28
Upstream Interface: Vlan-interface1
List of 2 downstream interfaces
1: Vlan-interface2
74

Table of Contents

Other manuals for HP 5900 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5900 series and is the answer not in the manual?

HP 5900 series Specifications

General IconGeneral
Ports48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity1.28 Tbps
MAC Address Table Size128K
Routing ProtocolsRIP, OSPF, BGP, IS-IS
VLAN Support4K VLANs
Dimensions440 x 460 x 44 mm
Operating Temperature0°C to 45°C
Operating Humidity10% to 90% (noncondensing)

Related product manuals