HP 5900 series - Page 121

111
Views
IGMP view
Predefined user roles
network-admin
Parameters
interval: Sets an IGMP startup query interval in the range of 1 to 31744 seconds.
Usage guidelines
This command and the igmp startup-query-interval command have the same function but different
effective ranges:
• The startup-query-interval command in IGMP view takes effect on all interfaces.
• The igmp startup-query-interval command takes effect on the current interface.
For an interface, the igmp startup-query-interval command takes priority over the startup-query-interval
command in IGMP view.
Examples
# Set the global IGMP startup query interval to 100 seconds on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] startup-query-interval 100
Related commands
igmp startup-query-interval