HP 5900 series Command Reference

131
• wc: Specifies PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify an incoming interface, the command displays PIM routing entries that contain all incoming
interfaces.
mode mode-type: Specifies a PIM mode. If you do not specify a PIM mode, the command displays PIM
routing entries in all PIM modes. The available PIM modes include:
• bidir: Specifies BIDIR-PIM.
• dm: Specifies PIM-DM.
• sm: Specifies PIM-SM.
• ssm: Specifies PIM-SSM.
outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing
interface. If you do not specify an outgoing interface, the command displays PIM routing entries that
contain all outgoing interfaces. Whether an outgoing interface is contained in the PIM routing entries
depends on the following conditions:
• If you specify an excluded interface, the command displays PIM routing entries that do not contain
the specified outgoing interface.
• If you specify an included interface, the command displays PIM routing entries that contain the
specified outgoing interface.
• If you specify a matching interface, the command displays PIM routing entries that contain only the
specified outgoing interface.
Examples
# Display PIM routing entries on the public network.
<Sysname> display pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(172.168.0.12, 227.0.0.1)
RP: 2.2.2.2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: Vlan-interface1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47
Table 45 Command output
Field Descri
p
tion
Total 0 (*, G) entry; 1 (S, G) entry Total number of (*, G) entries, and the total number of (S, G) entries.
(172.168.0.12, 227.0.0.1) (S, G) entry.
Protocol PIM mode.

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)