To Next Page

To Previous Page

Predefined user roles

network-admin

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. If you do not specify a VPN instance, the command clears the multicast routing

entries on the public network.

source-address: Specifies a multicast source address.

group-address: Specifies a multicast group address in the range of 224.0.0.0 to 239.255.255.255.

mask-length: Specifies an address mask length. The default value is 32. For a multicast group address,

the value range for this argument is 4 to 32. For a multicast source address, the value range for this

argument is 0 to 32.

mask: Specifies an address mask. The default is 255.255.255.255.

incoming-interface: Specifies the routing entries that contain the specified incoming interface.

interface-type interface-number: Specifies an incoming interface by its type and number.

all: Specifies all multicast routing entries.

Usage guidelines

When a routing entry is deleted from the multicast routing table, the associated forwarding entry is also

deleted from the multicast forwarding table.

Examples

# Clear the routing entries for the multicast group 225.5.4.3 from the multicast routing table on the public

network.

<Sysname> reset multicast routing-table 225.5.4.3

Related commands

display multicast routing-table

Other manuals for HP 5900 series

Questions and Answers:

Need help?

Do you have a question about the HP 5900 series and is the answer not in the manual?

General