127
PIM version: 2
PIM mode: Sparse
PIM DR: 10.1.1.2
PIM DR Priority (configured): 1
PIM neighbor count: 1
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM override interval (negotiated): 2500 ms
PIM override interval (configured): 2500 ms
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0xF5712241
PIM require generation ID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 180 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM BSR domain border: disabled
PIM BFD: disabled
PIM passive: disabled
Number of routers on network not using DR priority: 0
Number of routers on network not using LAN delay: 0
Number of routers on network not using neighbor tracking: 2
Table 43 Command output
Field Descri
tion
PIM mode
PIM mode:
• Dense.
• Sparse.
PIM DR IP address of the DR.
PIM DR Priority (configured) Configured DR priority.
PIM neighbor count Total number of PIM neighbors.
PIM hello interval Interval between two hello messages.
PIM LAN delay (negotiated) Negotiated PIM message propagation delay.
PIM LAN delay (configured) Configured PIM message propagation delay.
PIM override interval (negotiated) Negotiated interval for overriding prune messages.
PIM override interval (configured) Configured interval for overriding prune messages.
PIM neighbor tracking (negotiated) Negotiated neighbor tracking status: enabled or disabled.
PIM neighbor tracking (configured) Configured neighbor tracking status: enabled or disabled.
PIM require generation ID
Whether the feature of discarding hello messages without
Generation_ID is enabled.
PIM hello hold interval PIM neighbor lifetime.
To Next Page
Loading...
Need help?
General
