HP 5900 series Command Reference

129
Neighbor Interface Uptime Expires DR-Priority Mode
10.1.1.2 Vlan1 02:50:49 00:01:31 1 B
20.1.1.2 Vlan2 02:49:39 00:01:42 1
# Display detailed information about the PIM neighbor with the IP address 11.110.0.20 on the public
network.
<Sysname> display pim neighbor 11.110.0.20 verbose
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Bidirectional PIM: Enabled
Table 44 Command output
Field Descri
p
tion
Neighbor IP address of the PIM neighbor.
Interface Interface that connects to the PIM neighbor.
Uptime Length of time the PIM neighbor has been up.
Expires/Expiry time
Remaining lifetime for the PIM neighbor. If the PIM neighbor is always up
and reachable, this field displays never.
DR-Priority/DR Priority Priority of the PIM neighbor.
Mode
PIM mode. If the PIM mode is BIDIR-PIM, this field displays B. If a PIM
mode other than BIDIR-PIM is used, this field is blank.
Generation ID
Generation ID of the PIM neighbor. (A random value represents a status
change of the PIM neighbor.)
Holdtime
Lifetime of the PIM neighbor. If the PIM neighbor is always up and
reachable, this field displays forever.
LAN delay PIM message propagation delay.
Override interval Interval for overriding prune messages.
State refresh interval
Interval for refreshing state. This field is displayed only when the PIM
neighbor operates in PIM-DM mode and the state refresh capability is
enabled.
Neighbor tracking Neighbor tracking status: enabled or disabled.
Bidirectional PIM Whether BIDIR-PIM is enabled.

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)