Korg NAUTILUS Series Parameter Guide

EP-1: Tone Adjust Insert Effects
375
EP-1: Tone Adjust
EP-1 Tone Adjust Default Settings
Common Tone Adjust parameters
The EP-1 supports the following Common Tone Adjust
parameters:
Off. This means that the Tone Adjust control has no effect.
Common LFO Speed. (–99…+99, Relative)
This scales the EXi Program’s Common LFO Frequency.
When the LFO is in MIDI/Tempo mode, this adjusts the
Base Note.
Common Step Sequencer Attack Smoothing. (00…99,
Absolute)
This Absolute parameter sets amount of attack smoothing
for the Common Step Sequencer. For more information,
please see “Smoothing” on page 137.
Common Step Sequencer Decay Smoothing. (00…99,
Absolute)
This Absolute parameter sets amount of decay smoothing
for the Common Step Sequencer. For more information,
please see “Smoothing” on page 137.
Tine
Treble
Tine
Bass
Vibrato
Intensity
Vibrato
Speed
Cabinet
Drive
Hammer
Width
Attack
Brightness
Volume
Release
Noise
Level
Harmonic
Sound
Level
Harmonic
Sound
Decay
Harmonic
Sound
Release
IFX
Speed
[Hz]
IFX
Depth
IFX
Resonance
IFX
Wet/Dry
Attack
Noise
Level
Button 4:
Tine Vibrato On/O
Button 6:
Cabinet On/O

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)