Korg NAUTILUS Series Parameter Guide

EXi SGX-2: Page Menu Commands 5–1: String Resonance/Una Corda
357
for the Common Step Sequencer. For more information,
please see “Smoothing” on page 137.
SGX-2 Tone Adjust parameters
In addition to the Common Tone Adjust parameters listed
above, the SGX-2 adds a number of its own parameters.
Note that these additional parameters are separate for each
EXi, as opposed to being shared by both EXi in the Program.
All of the SGX-2 Tone Adjust parameters are of the
Absolute type, which directly correspond to the main
parameter values.
Setup
Vo l u m e
Pan
Velocity Bias
Lid Position
Stereo Perspective
Transpose
Velocity Intensity
Release Time
Components
Damper Resonance Enable
Damper Resonance Level
Note Release Enable
Note Release Level
Mechanical Noise Enable
Mechanical Noise Level
Damper Noise Enable
Damper Noise Level
String Resonance
String Resonance Enable
String Resonance Depth
EXi SGX-2: Page Menu Commands
Compare →p.112
Write Program →p.112
Exclusive Solo →p.113
PAGE →p.126
MODE →p.126

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)