Korg NAUTILUS Series

SEQUENCER > MIDI Filter/Zones 3–2: MIDI Filter2
491
3–2: MIDI Filter2
Here you can enable transmission for the RT Control Knobs
1–6.
3–2a: MIDI Filter 2
Track 01 (Track Number)
Enable Realtime Control Knob 1 [Off, On]
Sets whether to receive MIDI CC#74 (the filter cutoff
frequency of the NAUTILUS) from RT control knob 1 when
you use the SELECT button to select “SOUND”.
Enable Realtime Control Knob 2 [Off, On]
Sets whether to receive MIDI CC#71 (the filter resonance
level of the NAUTILUS) from RT control knob 2 when you
select “SOUND” with the SELECT button.
Enable Realtime Control Knob 3 [Off, On]
Sets whether to receive MIDI CC#79 (the filter EG intensity
of the NAUTILUS) from RT control knob 3 when you select
“SOUND” with the SELECT button.
Enable Realtime Control Knob 4 [Off, On]
Sets whether to receive MIDI CC#72 (the filter/amp EG
release times of the NAUTILUS) from RT control knob 4
when you select “SOUND” with the SELECT button.
Enable Realtime Control Knob 5 [Off, On]
Sets whether to receive MIDI CC#20 (EFFECT) from RT
control knob 5 when you select “SOUND” with the
SELECT button.
Enable Realtime Control Knob 6 [Off, On]
Sets whether to receive MIDI CC#21 (REVERB) from RT
control knob 6 when you select “SOUND” with the
SELECT button.
Track 02…16 (Track Number)
These are the MIDI Filter 2 settings for MIDI tracks 2
through 16. They are the same as for track 1. See “Track
01:”.
v 3–2: Page Menu Commands
• Compare →p.112
• Memory Status →p.521
• Exclusive Solo →p.113
• Rename Song →p.521
• Initialize Song →p.522
• Copy From Song →p.522
• Load Template Song →p.522
• Save Template Song →p.523
• FF/REW Speed →p.523
• Set Location (for Locate Key) →p.523
• GM Initialize →p.523
• Copy from Combi →p.525
• Copy From Program →p.525
•PAGE →p.126
•MODE →p.126
0–1a
1–1b
3–2PMC
3–2a