Korg NAUTILUS Series Parameter Guide

Effect Guide
730
Effects in each mode
PROGRAM mode
With HD-1Programs, you can use insert effects to process
the final sound in the same way that you use the Filter,
Driver, Amplifier, and EQ (equalizer) to process the sound
from the oscillators (OSC 1 & 2). Then the master effects are
used to create overall ambience such as reverb, and use the
total effects to make final adjustments. All of these settings
can be made independently for each program. EXi Programs
have a different filter and amp structure for each type, but
you can also apply insert effects, master effects, and total
effects to the oscillators (EXi1&2), just as for an HD-1
program.
PROGRAM mode: HD-1
COMBINATION and SEQUENCER modes
In COMBINATION and SEQUENCER modes, you can use
the track EQ and insert effects to process the program sound
(and audio track sound) of each timbre/track. Then you can
use the master effects to create overall ambience, and use the
total effects to make final adjustments.
In COMBINATION mode you can make these settings for
each combination, and in SEQUENCER mode you can make
them for each song.
In SEQUENCER mode, you can switch between effects or
modify the effect parameters and record these changes, so
that effects will switch automatically or effect parameters
will be modified automatically as the song plays back.
COMBINATION and SEQUENCER modes
SAMPLING mode
In SAMPLING mode, external audio sources from AUDIO
INPUT 1-2, and USB jacks can be processed by insert
effects, master effects, and total effects, and then sampled.
Use the Recording– Audio Input page to make audio input
settings for SAMPLING mode. These settings apply only to
SAMPLING mode.
Samples that you’ve assigned as a multisample can also be
processed by the insert effects, master effects, and total
effects, and then resampled.
SAMPLING mode
Oscillator1 Filter1 Driver1 Amplier1
Oscillator2 Filter2 Driver2 Amplier2 EQ
EQ
Insert Eect 1–12
Drum Track
Total Eect 1, 2
Master Eect 1, 2
Return
OUTPUT
L/MONO, R
Send
Timbre 1 /MIDI Track 1 EQ
Timbre 16 /MIDI Track 16 EQ
Audio Track 1 EQ
Audio Track 16 EQ
Insert Eect 1–12 Total Eect 1, 2
Master Eect 1, 2
Return
OUTPUT
L/MONO, R
Send
Insert Eect 1–12 Total Eect 1, 2
Master Eect 1, 2
Return
Sample
Recording
Send
Oscillator
AUDIO INPUT (1, 2)
USB IN (1, 2)
EQ Insert Eect 1–12 Total Eect 1, 2
Master Eect 1, 2
Return
Resampling
Send

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)