Korg NAUTILUS Series Parameter Guide

559
SET LIST mode
Overview
Set Lists make it simple to play and organize any of the
sounds loaded into the NAUTILUS, without regard for what
bank they’re stored in or whether they’re Programs,
Combinations, or even Songs.
Large on-screen buttons with selectable colors make sound
selection fast and foolproof, and the Program Up or Down
footswitch assignments can be used for hands-free sound
changes. Cut, copy, paste, and insert tools make re-ordering
a snap.
Smooth Sound Transitions let the previous sound and its
effects ring out naturally, making it easy to change sounds
during a live performance. Set Lists give you greater control
over these transitions, in comparison to the other modes. You
can fine-tune the ring-out time for each sound, so that (for
instance) one sound fades out very quickly, while another
sound’s delays continue to repeat for ten or twenty seconds.
Long comments let you store lyrics or performance notes
with the sound.
Set Lists are great for live performance, but they’re also
handy for organizing sounds in general. For example, you
could create a Set List with all of your favorite String
sounds, including both Programs and Combinations.

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)