SEQUENCER mode
492
3–3: MIDI Filter3
3–3a: MIDI Filter 3
Track 01 (Track Number)
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
buttons will be received.
The function of these buttons is specified in the EQ/X-
Y/Controllers– Controllers page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in
GLOBAL > Controllers/Scales– Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in
GLOBAL > Controllers/Scales– Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter will be received.
Track 02…16 (Track Number)
These are the MIDI Filter 3 settings for MIDI tracks 2
through 16. They are the same as for track 1, as described
above.
v
3–3: Page Menu Commands
• Compare →p.112
• Memory Status →p.521
• Exclusive Solo →p.113
• Rename Song →p.521
• Initialize Song →p.522
• Copy From Song →p.522
• Load Template Song →p.522
• Save Template Song →p.523
• FF/REW Speed →p.523
• Set Location (for Locate Key) →p.523
• GM Initialize →p.523
• Copy from Combi →p.525
• Copy From Program →p.525
• PAGE →p.126
•MODE →p.126
0–1a
1–1b
3–3PMC
3–3a
To Next Page
Loading...
Need help?
General
