EXi: EP-1 MDS Electric Piano
364
4–2: Oscillator
4–2a: Harmonic Sound
Level [000…100]
This controls the volume level of the main pitched part of the
sound.
AMS [List of AMS Sources]
This selects an AMS source to control the Harmonic Sound
Level. For a list of AMS sources, see “Alternate Modulation
Source (AMS) List” on page 901.
Intensity [–100…+100]
This controls the depth and direction of the Harmonic
Sound Level AMS modulation.
Decay [–100…+100]
This controls the decay time, including both the timbre and
the level.
AMS [List of AMS Sources]
This selects an AMS source to control the Decay. For a list
of AMS sources, see “Alternate Modulation Source (AMS)
List” on page 901.
Intensity [–100…+100]
This controls the depth and direction of the Decay AMS
modulation.
Release [–100…+100]
This controls the release time, including both the timbre and
the level.
AMS [List of AMS Sources]
This selects an AMS source to control the Release. For a list
of AMS sources, see “Alternate Modulation Source (AMS)
List” on page 901.
Intensity [–100…+100]
This controls the depth and direction of the Release AMS
modulation.
4–2b: Attack & Release Noises
Attack Noise Level [0…100]
This controls the volume level of the attack noise.
AMS [List of AMS Sources]
This selects an AMS source to control the Attack Noise
Level. For a list of AMS sources, see “Alternate Modulation
Source (AMS) List” on page 901.
Intensity [–100…+100]
This controls the depth and direction of the Attack Noise
Level AMS modulation.
Release Noise Level [0…100]
This controls the volume level of the release noise. This
level is also scaled by the volume of the harmonic sound at
the time of release.
AMS [List of AMS Sources]
This selects an AMS source to control the Release Noise
Level. For a list of AMS sources, see “Alternate Modulation
Source (AMS) List” on page 901.
Intensity [–100…+100]
This controls the depth and direction of the Release Noise
Level AMS modulation.
Attack Brightness [-18.0…+00.0…+18.0]
This controls the brightness of the attack noise.