EasyManua.ls Logo

Korg NAUTILUS Series

Korg NAUTILUS Series
961 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
826
071: Stereo Pitch Shifter BPM
This stereo pitch shifter enables you to set the delay time to
match the song tempo.
INPUT
Input Level Dmod [%] [+/–100]
Sets the modulation amount of the input level. p.823.
Source [Off…Tempo]
Selects the modulation source for the input level. p.823.
PITCH SHIFTER
Mode [Slow, Medium, Fast]
Switches Pitch Shifter mode. p.823.
L/R Pitch [Normal, Up/Down]
Determines whether or not the L/R pitch shift amount is
inverted. p.824.
Pitch Shift [1/2 steps] [–24…+24]
Sets the pitch shift amount in steps of a semitone. p.823
Fine [cents] [+/–100]
Sets the pitch shift amount in steps of one cent. p.823
Source [Off…Tempo]
Selects the modulation source of pitch shift amount. p.823.
Pitch Shift Amount [–24…+24]
Sets the modulation amount of pitch shift amount. p.823.
Fine Amount [+/–100]
Sets the modulation amount of pitch shift amount Sets the
modulation amount of pitch shift amount. p.823.
DELAY
BPM [MIDI, 40.00…300.00]
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.825.
Time Over? L > [---, OVER!]
Display the error message if the left channel delay time
exceeds the upper limit. p.825.
Time Over? R > [---, OVER!]
Display the error message if the right channel delay time
exceeds the upper limit. p.825.
L Base Note [ … ī˜„ ]
Selects the type of notes to specify the left channel delay
time. p.825.
Times [x1…x32]
Sets the number of notes to specify the left channel delay
time. p.825.
R Base Note [ … ī˜„ ]
Selects the type of notes to specify the right channel delay
time. p.825.
Times [x1…x32]
Sets the number of notes to specify the right channel delay
time. p.825.
Feedback Position [Pre, Post]
Switches the feedback connection. p.824.
Feedback [+/–100]
Sets the feedback amount. p.824.
High Damp [%] [0…100]
Sets the amount of high-frequency attenuation for the
feedback path.
Spread [+/–100]
Sets the width of the stereo image of the effect sound.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
ā€œOUTPUTā€ on page 762.
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
High Damp
High Damp
Input Level
Input Level
Feedback Position
Pre
Pre
Post
Post
Delay
Pitch Shifter
Delay
Pitch Shifter

Table of Contents

Other manuals for Korg NAUTILUS Series

Related product manuals