Korg NAUTILUS Series Parameter Guide

PROGRAM mode: HD-1
2
PROGRAM > Home
This is the main page of PROGRAM mode for HD-1
Programs. Among other things, you can:
• Select Programs
• Jump directly to the main editing pages
• Make edits Arpeggiator, Drum truck/Step sequencer to
Scene
• Set up the audio inputs and resampling options
Page Select
Select the pages using the methods shown below.
1. Press the PAGE button to display “Page Select”.
The abbreviated names of each page are shown in “Page
Select”.
2. Select the desired page using the display.
0–1: Overview
This is the main page for selecting Programs, which are the
basic sounds of the NAUTILUS. It also includes an
interactive overview of the most important Program
parameters, such as envelopes, LFOs, Multisamples, filters,
and so on. Just touch any of these overview areas, and you’ll
jump to the corresponding edit page.
Tip: Wherever you are in the PROGRAM mode pages,
pressing EXIT three times (or fewer) will take you back to
this page, and select the Program name. You can then
immediately use each VALUE controller to select a different
Program.
0–1PMC*
(Page Menu Command)
0–1b
0–1a
0–1c
0–1d

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)