Korg NAUTILUS Series

PROGRAM > Home 0–1: Overview
3
0–1a: Program Select
Program Select [0...127 (A...T Bank),
1...128 (GM, g(1)...g(9), g(d) Bank]
This is the currently selected Program.
To switch between Programs, use the VALUE controller or
the Program Select menu.
Changing the Program
• Select “Program Select” using the VALUE dial or the
+/– buttons.
• Select from the Programs displayed by bank in the
Bank/Program Select menu. For more information, see
“Bank/Program Select menu” on page 6.
• Select from the Programs displayed by category in the
Category/Program Select menu. For more information,
see “Category/Program Select menu” on page 5.
• Use the Favorites feature to display and select Programs
whose “Favorite” setting is on in the Bank/Program
Select menu or the Category/Program Select menu.
• Use the foot switch to switch Programs. For more
information, see “Foot Switch Assign” on page 655,
“Foot Switch Assignments” on page 915.
• Transmit a MIDI program change message from an
external MIDI device connected to the NAUTILUS.
Main Category [00…18]
Displays the main category for the Program. Each Program
is categorized into up to 18 categories, and each category
contains eight sub-categories.
Bank Type [(HD-1, EXi)]
This shows whether the current Bank contains HD-1
Programs or EXi Programs. The two Program types can’t be
mixed in a single bank.
HD-1: The Bank contains HD-1 Programs.
EXi: The Bank contains EXi Programs.
Changing the Program Bank Types
Banks can contain either HD-1 Programs or EXi Programs,
but not both. This assignment can be set separately for each
bank. To change the Program bank type, use the “Set
Program Bank Type” page menu command in the GLOBAL
> Basic- Basic Setup page. For more information, see “Set
Program Bank Type” on page 684.
Note: Set the bank to “HD-1” when exporting resampled
multisamples as Programs. These multisamples cannot be
exported to banks set as “EXi”.
Favorite [Off, On]
On (checked): The selected Program(s) will be added to the
favorites. For more information, see “Favorite” on page 7.
Tempo (  ) [040.00…300.00, EXT]
This is the tempo for the current Program, which applies to
tempo-synced LFOs and Wave Sequences, Arpeggiator,
Drum Track, and tempo-synced effects.
040.00…300.00 allow you to set a specific tempo in BPM,
with 1/100 BPM accuracy. In addition to using each VALUE
controller, or by playing a few quarter-notes on the TAP
button. To set values below the decimal point, hold down the
ENTER button and input the value with the VALUE
controller.
EXT means that the tempo will sync to external MIDI
clocks. You’ll see this if the Global MIDI page MIDI Clock
parameter is set to External MIDI or USB, or if it’s set to
Auto MIDI or Auto USB and the NAUTILUS is currently
receiving MIDI clocks. For more information, please see
“MIDI Clock (MIDI Clock Source)” on page 651.
0–1b: Overview and Page Jump
This section shows an overview of the important Program
settings, such as the selected Multisamples or Wave
Sequences and their velocity ranges, filter settings, EGs and
LFOs, and so on.
The graphics give you a quick way to check all of these
settings at a glance. They also let you jump instantly to any
of the displayed parameters. Just touch one of the graphics,
and you’ll jump to the page containing its parameters. For
instance, if you touch the Filter EG graphic, you’ll go to the
Filter EG page.
OSC1
OSC1 Graphic or Multisample/Wave
Sequence/Drum Kit names
This area either shows the names of the Multisamples, Wave
Sequences, or Drum Kit assigned to OSC1, or a graphic
representing the type of sound.
Whether names or the graphic are displayed is controlled by
the Show MS/WS/DKit Graphics menu command. For
more information, see “Show MS/WS/DKit Graphics” on
page 113 and “1–1h: Play Page MS/WS/DKit Display” on
page 40.
If names are shown, colors and abbreviations are used to
distinguish between various possibilities, as detailed below:
• The “GLOBAL > Basic Setup: Play Page Overview,
Show MS/WS/DKit Graphics” checkbox is selected.
• “Show MS/WS/DKit Graphic” (“PROGRAM > Home
page” menu command) checkbox is selected.
Touch this area to jump to the corresponding PROGRAM >
OSC/Ptich– OSC1 Basic page.
Main Category
Bank Type
Program Select Popup
Program Select
Favorite Tempo