Korg NAUTILUS Series

EXi: AL-1 Analog Synthesizer
182
EXi AL-1: Page Menu Commands
Compare →p.112
Write Program →p.112
Exclusive Solo →p.113
Copy Envelope →p.182
Swap Envelope →p.182
Copy Step Sequencer →p.140
Copy LFO →p.182
Swap LFO →p.182
PAGE →p.126
MODE →p.126
Copy Envelope
This copies settings from one AL-1 envelope to another.
1. Select “Copy Envelope” to open the dialog box.
2. Use the “From” field to select the copy-source
envelope.
3. Use the “To” field to select the copy-destination
envelope.
4. Press the OK button to execute the Copy Envelope
operation. If you decide not to execute, press the
Cancel button.
Swap Envelope
This exchanges settings between two AL-1 envelopes.
1. Select “Swap Envelope” to open the dialog box.
2. Use the “Source 1” and “Source 2” fields to select the
two envelopes you want to swap.
3. Press the OK button to execute the Swap Envelope
operation. If you decide not to execute, press the
Cancel button.
Copy LFO
This copies settings from one AL-1 LFO to another.
1. Select “Copy LFO” to open the dialog box.
2. Use the “From” field to select the copy-source LFO.
3. Use the “To” field to select the copy-destination LFO.
4. Press the OK button to execute the Copy LFO
operation. If you decide not to execute, press the
Cancel button.
Swap LFO
This exchanges settings between two AL-1 LFOs.
1. Select “Swap LFO” to open the dialog box.
2. Use the “Source 1” and “Source 2” fields to select the
two LFOs you want to swap.
3. Press the OK button to execute the Swap LFO
operation. If you decide not to execute, press the
Cancel button.