Korg NAUTILUS Series - 0-2: Performance Meters

COMBINATION > Home 0–2: Performance Meters
389
Note: The volume will be adjusted in the same way as that of
the main Combination. +001...-127 lowers the volume, and
+001...+127 raises the volume.
If there is only one timbre in that drum track that is
sounding, this directly adjusts the value of the timbre
volume. If there is more than one timbre in the drum track
that is sounding, this adjusts the overall volume while
maintaining the volume balance between timbres. For this
reason, the value will be reset to “+000” each time you open
the Quick Split dialog box.
Tempo [040.00...300.00]
This sets the tempo for Arpeggiator, the drum track, and
other tempo-related features.
By default, this will be the tempo of the Combination or
Program whose ARP/DRUM is selected; you can then
change it as desired.
Write Splitted Combi
When you’ve created a split sound that you like, press the
Write Splitted Combi button to save it as a combination.
The Write Combination dialog box will appear. For more
information, see “Write Combination” on page 433.
After the Write is complete, the system enters
COMBINATION mode with the newly created Combination
selected.
Cancel
If you press the Cancel button the Quick Split dialog box
closes, and the settings are canceled.
0–2: Performance Meters
This page lets you look at the real-time performance of the
NAUTILUS, including voice usage, voice stealing, and effects.
For more information, see “0–2: Performance Meter” on
page 13.
v 0–2: Page Menu Commands
• Compare →p.112
• Write Combination →p.433
• Exclusive Solo →p.113
• Copy From Program →p.433
• Add To Set List →p.113
• Load required samples →p.114
• Edit Program →p.434
• Initialize Combination →p.435
• PAGE →p.126
• MODE →p.126