Korg NAUTILUS Series Parameter Guide

COMBINATION mode
416
3–3: MIDI Filter3
3–3a: MIDI Filter3
Timbre 01
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
switches will be received.
The function of these switches is specified in the EQ/X-
Y/Controllers– Controllers page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in
GLOBAL > Controllers/Scales page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in
GLOBAL > Controllers/Scales page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter will be received.
Timbres 02…16
These are the MIDI Filter3 settings for timbres 2 through 16.
They are the same as for timbre 1. See “Timbre 01”.
v 3–3: Page Menu Commands
• Compare →p.112
• Write Combination →p.433
• Exclusive Solo →p.113
• Copy From Program →p.433
• PAGE →p.126
•MODE →p.126
3–3PMC
3–3a
1–1a
1–1b

Korg NAUTILUS Series Specifications

General

Sampling	Open Sampling System
MIDI	In, Out, Thru
Preset Combinations	384
Keyboard	61-key (NAUTILUS 61), 73-key (NAUTILUS 73), 88-key (NAUTILUS 88, RH3 weighted action)
Effects	12 Insert Effects; 2 Master Effects; 2 Total Effects
Sequencer	16-track MIDI Sequencer
Storage	Internal SSD (60 GB)
Audio Inputs	2 x 1/4"
Audio Outputs	Headphones
USB	Type A (host), Type B (device)
Weight	NAUTILUS 88: 23.1 kg
Display	8 inch TouchView™ GUI (800x600 pixels)